FGDB Pump Machinery Equipment Co., Ltd.
FGDB Pump Machinery Equipment Co., Ltd.
PAKER Piston Pump   Rexroth check valve   Rexroth Solenoid directional valve  
English
English
  • Home
  • Stock Categories
    • PAKER Piston Pump
    • Rexroth check valve
    • Rexroth Solenoid directional valve
    • Yuken pressure valve
    • Rexroth Piston Pump
    • DENISON vane pump
    • Yuken Double Vane pump
    • Danfoss Shut-off valves
    • Rexroth THROTTLE VALVE
    • Yuken Piston pump
    • Rexroth PRESSURE RELIEF VALVE
    • Rexroth Vane pump
    • Yuken single Vane pump
    • BOSCH injector
    • CUMMINS injector
    • DEUTZ injector
    • COMMON RAIL injector
    • SINGLE ROW CYLINDRICAL ROLLER BEARING
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Kaydon Slewing Bearing
    • THK Linear Guide
    • THK Miniature Linear Guide
    • THK Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • THK Linear Bearings And Rails
    • THK Linear Motion
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
    • Single-row Deep Groove Ball Bearings
    • Double-row Angular Contact Ball Bearings
  • Technical Articles
  • PAKER Piston Pump
  • Rexroth check valve
  • Rexroth Solenoid directional valve
✖

Home

Stock Categories

Technical Articles

PAKER Piston Pump

Rexroth check valve

Rexroth Solenoid directional valve

Home>Products>Curved Linear Guide>4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR

  • 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR
  • 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR

THK 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR

category

Curved Linear Guide

THK 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] Bearing SPECIFICATIONS

  • THK

  • 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]

  • 3.5000 in
  • Non-Expansion Bearing (Fixed)
  • 6.1000 in
  • Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®
  • 8.6300 in
  • 7.3750 in
  • 3.8400 in
  • 86600 lbs
Download THK 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] Spec Sheet
FGDB Pump Machinery Equipment Co., Ltd.

FGDB Pump Machinery Equipment Co., Ltd.China

  • FGDB Pump Machinery Equipment Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR Technology

  • 3.5000 in
  • Non-Expansion Bearing (Fixed)
  • 6.1000 in
  • Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®
  • 8.6300 in
  • 7.3750 in
  • 3.8400 in
  • 86600 lbs
  • 3.8400 in
  • 99000 lbs
  • Four-Bolt Piloted
  • Open
  • Spherical Roller
  • Lubrication Fitting
  • Solid Housing
  • 0.7500 in
  • Round
  • Powder coat
  • Heavy Duty
  • 883450106856
  • Cast Steel
  • Click here
  • Click here
  • Single V-Lock
  • 32 lbs
4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR pdf

THK 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR Characteristics

Cage MaterialSteel
Y1 - ISO Factor52.71
C1(2) - Dynamic Radial Rating (Two-Rows)4060000 N
D500.000 mm
R - Inner Ring To Clear Radius14.000 mm
Bearing Weight158.000 Kg
da - Inner Ring Backing Diameter336.000 mm
Y0 - ISO Factor41.82
B - Outer Ring Width200.000 mm
Cage TypeEJ
e - ISO Factor30.37
r - Outer Ring To Clear Radius24.000 mm
Y2 - ISO Factor61.78
Design UnitMETRIC
Reference Thermal Speed Rating (Oil)7470
C0 - Static Radial Rating6270000 N
Da - Outer Ring Backing Diameter455.000 mm
Superseded Part24160CJW507C08
Reference Thermal Speed Rating (Grease)440
B - Inner Ring Width200 mm

4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR Cross Reference

No.BrandMaterialDays to ShipCallout SizeAccuracy GradeRolling ElementNumber of blocksRail Length L(mm)Rail Width W1(mm)
HR2555T+[148-2600/1]LTHKCarbon Steel42 Days2555Standard GradeBall1148 ～ 260022
HR2555T+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]THKCarbon Steel42 Days2555Standard GradeBall1148 ～ 260022
HR2555T+[148-2600/1]L[H,​P,​SP,​UP]THKCarbon Steel42 Days2555High Grade / Precision Grade / High Precision Grade / Extra High Precision GradeBall1148 ～ 260022
HR2555T+[148-2600/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)]THKCarbon Steel42 Days2555High Grade / Precision Grade / High Precision Grade / Extra High Precision GradeBall1148 ～ 260022
HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]LTHKCarbon Steel42 Days2555Standard GradeBall1148 ～ 260022
HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]THKCarbon Steel42 Days2555Standard GradeBall1148 ～ 260022
HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[H,​P,​SP,​UP]THKCarbon Steel42 Days2555High Grade / Precision Grade / High Precision Grade / Extra High Precision GradeBall1148 ～ 260022
HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)]THKCarbon Steel42 Days2555High Grade / Precision Grade / High Precision Grade / Extra High Precision GradeBall1148 ～ 260022
2HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]LTHKCarbon Steel42 Days2555Standard GradeBall2148 ～ 260022
2HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]THKCarbon Steel42 Days2555Standard GradeBall2148 ～ 260022
2HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[H,​P,​SP,​UP]THKCarbon Steel42 Days2555High Grade / Precision Grade / High Precision Grade / Extra High Precision GradeBall2148 ～ 260022

 

4HR3065T+[175-3000/1]L THK Separated Linear Guide Side Rails Set Model HRDa:68 mm; Calculation factor (e):0,3; Db:70 mm; T:23,812 mm; a:15,9 mm; Bore Diameter (mm):33,338; Bearing number:2785R/2729; r min.:3,6 mm; Width (mm):25,654; Basic static load rating (C0):92,2 kN; da:46 mm; B:25,654 mm; db:40 mm; Calculation factor (Y0):1,09; Basic dynamic load rating (C):74,1 kN;
3SRS15GM+[44-1000/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload SelectableL:600 mm; H1:50 mm; H:180 mm; Bearing number:UCP326; Width (mm):135; Bore Diameter (mm):130; H2:355 mm; L1:195 mm; J:480 mm; Basic static load rating (C0):214 kN; S:54 mm; Basic dynamic load rating (C):229 kN; Weight:72,1 Kg; Inventory:0.0; Product Group:M06110; A:140 mm; Category:Mounted Units &
3SRS15GM[DD,​DDHH,​SS,​SSHH,​UU]+[44-1000/1]L[H,​P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload SelectableDimension R:0.25 in; Dimension S:3.62 in; Bearing Number:22226; Shaft Size Type:Imperial; C0 - Static Load:212000 lb; Dimension M:2.37 in; Oil Lubrication - T Seal:1500 rpm; Grease Lubrication - M/N Seal:700 rpm; Float:0.083 in; Oil Lubrication - M/N Seal:700 rpm; Pre Install Clearance Max:0.145 mm;
4HR3065+[146-3000/1]L[H,​P,​SP,​UP] THK Separated Linear Guide Side Rails Set Model HRd:100 mm; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:23400 lbf; WPD:143.2 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:46900 N; Cg - Geometry Factor:0.144; G2 - Heat Generation Factor (Rib-Roller End):50.3; DD:130.1 mm; db - Cone Backface
4HR3065T+[175-3000/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HRBearing number:15103/15243; C:14,288 mm; r:2 mm; Outer Diameter (mm):61,912; Size (mm):26.157x61.912x19.05; D:61,912 mm; R:0,8 mm; Bore Diameter (mm):26,157; d:26,157 mm; T:19,05 mm; Width (mm):19,05; B:20,638 mm;
4HR3065T+[175-3000/1]L[H,​P,​SP,​UP] THK Separated Linear Guide Side Rails Set Model HRGrease lub.:4300; C0r:30.7; Outer Race Width:0.63 Inch | 16 Milli; ra max.:1 mm; Manufacturer Name:KOYO; Internal Clearance:C0-Medium; Rolling Element:Ball Bearing; Outside Diameter:5.512 Inch | 140 Mil; Width (mm):16; Basic static load rating (C0):30,7 kN; (Refer.)Mass(kg):0.606; da min.:115 mm; UN
4HR3065+[146-3000/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HRFillet Radius/Chamfer:3 mm; Enclosure:Open; Configuration:Single Row; Da (max):176 mm; Bore Type:Cylindrical Bore; r1:3 mm; Weight:5.920 kg; Limiting Speed - Oil:3,400 rpm; db (min):104 mm; dc (min):117 mm; db (max):111 mm; B:43 mm; ra1 (max):2.5 mm; D:190 mm; Dynamic Load Rating:335,000 N; ra (max)
3SRS15GM[DD,​DDHH,​SS,​SSHH,​UU]+[44-1000/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload SelectableUNSPSC:31171504; Snap Ring:No; Manufacturer Item Number:16072 MA; Bearing number:16072 MA; Da - max.:525 mm; Keyword String:Ball; Product Group:B00308; Calculation factor f0:16; Bore Diameter (mm):540; Size (mm):540x360x57; d:360 mm; Calculation factor - kr:0.02; Weight / LBS:125.663; Fatigue load l

 

 

4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR Video

 

THK 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] INTERCHANGE

Curved Linear Guide Part series 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] is a potential replacement for these common bearing part numbers:

  • 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]

  • 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]

  • 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]

  • 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]

  • 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]

  • 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]

  • 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]

  • 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]

Contact Us

FGDB Pump Machinery Equipment Co., Ltd.
Address5625 South Layton Road Anderson Indiana 46011, U.S.A.
Phone(Working Time)
Fax
  • FGDB Pump Machinery Equipment Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

THK 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] Technical Articles

How do you adjust the pressure on a hydraulic pump?
How to Set a Hydraulic Relief Valve - YouTubeI want to set the pressure around 2000 psi. in this set up you take the jam heading the pump we turn the How to adjust a hydraulic pump output pressure - QuoraPump does not generate pressure, it generates...
What is a 2 stage hydraulic pump?
Hydraulic Gear Pump - 16 GPM, 2-Stage (Brand Amazon.com: Hydraulic Gear Pump - 16 GPM, 2-Stage (Brand New): Home Improvement 2 Stage (Log Splitter) Pumps | Hydraulic Pumps | HydraulicsResults 1 - 15 of 17 — 2 Stage (Log Splitter)...
Which pump is used in hydraulic jack?
Hydraulic jack - DDL WikiFeb 3, 2014 — The Big Red Hydraulic Bottle Jack can be operated with everything in the Inner handle piece, used to pump fluid, Painted steel, Bent, Welded Jack (device) - WikipediaJump to Hydraulic jack — A...

Curved Linear Guide CATEGORIES

  • PAKER Piston Pump
  • Rexroth check valve
  • Rexroth Solenoid directional valve
  • Yuken pressure valve
  • Rexroth Piston Pump
  • DENISON vane pump
  • Yuken Double Vane pump
  • Danfoss Shut-off valves
  • Rexroth THROTTLE VALVE
  • Yuken Piston pump
  • Rexroth PRESSURE RELIEF VALVE
  • Rexroth Vane pump
  • Yuken single Vane pump
  • BOSCH injector
  • CUMMINS injector
  • DEUTZ injector
  • COMMON RAIL injector
  • SINGLE ROW CYLINDRICAL ROLLER BEARING
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Bearing Slewing Ring
  • Kaydon Slewing Bearing
  • THK Linear Guide
  • THK Miniature Linear Guide
  • THK Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • THK Linear Bearings And Rails
  • THK Linear Motion
  • Bearings For Metric And Inch Shaft Sizes
  • Cylindrical Roller Bearings
  • Single-row Deep Groove Ball Bearings
  • Double-row Angular Contact Ball Bearings
More

Customers Who Viewed THK 4HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] Bearing Also Viewed

  • 4HR3065T+[175-3000/1]L[H,​P,​SP,​UP] THK Separated Linear Guide Side Rails Set Model HR
  • 4HR3065T+[175-3000/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR
  • 4HR3065T+[175-3000/1]L THK Separated Linear Guide Side Rails Set Model HR
  • 4HR3065+[146-3000/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR
  • 4HR3065+[146-3000/1]L[H,​P,​SP,​UP] THK Separated Linear Guide Side Rails Set Model HR
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

FGDB Pump Machinery Equipment Co., Ltd.. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • PAKER Piston Pump
    • Rexroth check valve
    • Rexroth Solenoid directional valve
    • Yuken pressure valve
    • Rexroth Piston Pump
    • DENISON vane pump
    • Yuken Double Vane pump
    • Danfoss Shut-off valves
    • Rexroth THROTTLE VALVE
    • Yuken Piston pump
    • Rexroth PRESSURE RELIEF VALVE
    • Rexroth Vane pump
    • Yuken single Vane pump
    • BOSCH injector
    • CUMMINS injector
    • DEUTZ injector
    • COMMON RAIL injector
    • SINGLE ROW CYLINDRICAL ROLLER BEARING
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Kaydon Slewing Bearing
    • THK Linear Guide
    • THK Miniature Linear Guide
    • THK Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • THK Linear Bearings And Rails
    • THK Linear Motion
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
    • Single-row Deep Groove Ball Bearings
    • Double-row Angular Contact Ball Bearings
  • Technical Articles
  • PAKER Piston Pump
  • Rexroth check valve
  • Rexroth Solenoid directional valve
✖

Home

Stock Categories

Technical Articles

PAKER Piston Pump

Rexroth check valve

Rexroth Solenoid directional valve

Contact Us