- FGDB Pump Machinery Equipment Co., Ltd.
- PAKER Piston Pump Rexroth check valve Rexroth Solenoid directional valve
English
Home>Products>Bearing Slewing Ring>66387L Franke Slewing Ring Bearings
66387L Franke Slewing Ring Bearings
category
Bearing Slewing Ring
Franke 66387L Bearing SPECIFICATIONS
- Franke
66387L
- 140 mm
- 200 mm
- 25 mm
- 1.5 mm
- 2.5 mm
- 69.5 kN
- 120.6 kN
- 161 mm
-
FGDB Pump Machinery Equipment Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
66387L Franke Slewing Ring Bearings Specification details
- 140 mm
- 200 mm
- 25 mm
- 1.5 mm
- 2.5 mm
- 69.5 kN
- 120.6 kN
- 161 mm
- 178 mm
Franke 66387L 66387L Franke Slewing Ring Bearings Cross reference
| Cone Part Number | 14118 |
| B - Cone Width | 19.202 mm |
| Cup Part Number | 14274 |
| Db - Cup Backface Backing Diameter | 58.93 mm |
| e - ISO Factor8 | 0.38 |
| Design Units | Imperial |
| Bearing Weight | 0.4 Kg |
| d | 30 mm |
| B | 19.845 mm |
| Cg - Geometry Factor | 0.0668 |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 3180 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 2080 lbf |
| G2 - Heat Generation Factor (Rib-Roller End) | 9.4 |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 12300 lbf |
| Aa - Cage-Cone Backface Clearance | 0.5 mm |
| Series | 14000 |
| db - Cone Backface Backing Diameter | 37.08 mm |
| Cage Type | Stamped Steel |
| Y - ISO Factor9 | 1.57 |
| r - Cup Backface To Clear Radius2 | 3.30 mm |
Sponsored products related to 66387L Franke Slewing Ring Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | O.D. | I.D. | Length | End Cap | By-Pass | Adhesive | Efficiency | Media Type |
| P566387 | Donaldson | 3.1 | 1.67 | 8.1 | Corrosion Resistant CS/AL | None | Epoxy | Beta 2.5[c] >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| 77250B Franke Slewing Ring Bearings | Length Thru Bore:2.217 Inch | 56.3 Mi; H2:105,41 mm; B:56,49 mm; Mounting Method:Eccentric Collar; Bore:1.75 Inch | 44.45 Mi; Housing Material:Cast Iron; Housing Style:2 Bolt Pillow Block; Base to Center Height:2.063 Inch | 52.4 Mi; Inch - Metric:Inch; Bolt Spacing Minimum:5.374 Inch | 136.5Mi; Manu |
| 68725A Franke Slewing Ring Bearings | Basic static load rating (C0):105 kN; d1:30 mm; (Grease) Lubrication Speed:2400 r/min; D1:72 mm; Bearing number:54307U+U307; Weight:0,898 Kg; T:52 mm; d:37 mm; Basic dynamic load rating (C):55,5 kN; Bore Diameter (mm):37; D2:52 mm; |
| 68966A Franke Slewing Ring Bearings | r1,2 - min.:3.2 mm; ra max.:2.5 mm; r1,2 min.:3.2 mm; Basic dynamic load rating - C:212 kN; Outer Diameter (mm):69,85; Reference speed:4800 r/min; Axial load factor Y:0.6; B:34.925 mm; Fatigue load limit Pu:28 kN; da min.:82 mm; Limiting value e:0.2; UNSPSC:31171547; r3,4 - min.:3.2 mm; da - max.:13 |
| 68723A Franke Slewing Ring Bearings | Size (mm):30x40x16; Fw:30 mm; Outer Diameter (mm):40; Bearing number:BK304016; (Grease) Lubrication Speed:5600 r/min; C:16 mm; Bore Diameter (mm):30; Width (mm):16; Basic static load rating (C0):22,8 kN; D:40 mm; Basic dynamic load rating (C):17 kN; Weight:0,0469 Kg; |
| 74106A Franke Slewing Ring Bearings | Basic dynamic load rating (C):0,545 kN; Bearing number:MR 128; da min.:9,2 mm; Da max.:10,8 mm; Size (mm):8x12x2.5; Outer Diameter (mm):12; D:12 mm; Width (mm):2,5; (Grease) Lubrication Speed:40 000 r/min; B:2,5 mm; d:8 mm; r min.:0,15 mm; Basic static load rating (C0):0,274 kN; ra max.:0,15 mm; Wei |
| 68968A Franke Slewing Ring Bearings | Da - Cup Frontface Backing Diameter:11.85 in; Y - ISO Factor1:1.88; Y2 - ISO Factor6:3.15; Cg - Geometry Factor7:0.124; Design Units:Imperial; Series:H239600; D:12.6250 in; K - Factor3:1.83; Y1 - ISO Factor5:2.12; e - ISO Factor4:0.32; r - Cup Frontface To Clear Radius2:0.06 in; C - Double Cup Width |
| 68526A Franke Slewing Ring Bearings | B:26 mm; Width (mm):26; a:37,1 mm; Bore Diameter (mm):105; r min.:2 mm; D:160 mm; d:105 mm; (Grease) Lubrication Speed:7 500 r/min; Outer Diameter (mm):160; Basic dynamic load rating (C):37,6 kN; r1 min.:1 mm; Basic static load rating (C0):31,7 kN; C:26 mm; Bearing number:HAR021CA; Size (mm):105x160 |
| 74104A Franke Slewing Ring Bearings | Angle:9,5 °; dk:23,01 mm; Width (mm):14,27; r1 min.:0,81 mm; d:14,29 mm; r min.:0,3 mm; D:27,78 mm; Weight:0,042 Kg; Bearing number:GEFZ14S; Size (mm):14.29x27.78x14.27; Outer Diameter (mm):27,78; Basic dynamic load rating (C):15 kN; C:11,1 mm; B:14,27 mm; Bore Diameter (mm):14,29; |
66387L Franke Slewing Ring Bearings Video
Franke 66387L INTERCHANGE
Bearing Slewing Ring Part series 66387L is a potential replacement for these common bearing part numbers:
66387L
66387L
66387L
66387L
66387L
66387L
66387L
66387L
Contact Us
- FGDB Pump Machinery Equipment Co., Ltd.
- Address5625 South Layton Road Anderson Indiana 46011, U.S.A.
- Phone(Working Time)
- Fax
Franke 66387L Technical Articles
| How do you adjust the pressure on a hydraulic pump? |
| What is a 2 stage hydraulic pump? |
| Which pump is used in hydraulic jack? |
Bearing Slewing Ring CATEGORIES
- PAKER Piston Pump
- Rexroth check valve
- Rexroth Solenoid directional valve
- Yuken pressure valve
- Rexroth Piston Pump
- DENISON vane pump
- Yuken Double Vane pump
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
- Yuken Piston pump
- Rexroth PRESSURE RELIEF VALVE
- Rexroth Vane pump
- Yuken single Vane pump
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
- SINGLE ROW CYLINDRICAL ROLLER BEARING
- Large Slewing Bearings
- Slewing Ring Bearings
- Bearing Slewing Ring
- Kaydon Slewing Bearing
- THK Linear Guide
- THK Miniature Linear Guide
- THK Linear Guide Rails
- High Temperature Linear Guide
- Curved Linear Guide
- THK Linear Bearings And Rails
- THK Linear Motion
- Bearings For Metric And Inch Shaft Sizes
- Cylindrical Roller Bearings
- Single-row Deep Groove Ball Bearings
- Double-row Angular Contact Ball Bearings
68532A Franke Slewing Ring Bearings
77250B Franke Slewing Ring Bearings
68639A Franke Slewing Ring Bearings
68727A Franke Slewing Ring Bearings
68968A Franke Slewing Ring Bearings