Rexroth MK20G1X/V THROTTLE VALVE

Designation of housing:PE207N-; B:27 mm; G:R1/8"; T max.:100 °C; C0:15.2 kN; B1:43 mm; Z:21.5 mm; H2:93 mm; A1:27 mm; Weight:1.54 kg;

L:150 mm; B:53.7 mm; T min.:-40 °C; N:M16; Weight:4.2 kg; s1:26.85 mm; C:52.5 kN; J:105 mm; S:14.9 mm; H1:25 mm;

Oil Speed Rating n2:10000 rpm; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; B:21.00 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; d:35.000 mm; Grease Speed Rating n1:8500 rpm; Basic Static Radial Load Rating Co:19000 N; D:80.0000 mm; Basic Dynamic Radial Load Rating C:

C0:6.65 kN; T min.:-40 °C; A:25.5 mm; T max.:100 °C; A2:41.5 mm; G:M6x1; Designation of housing:F204-; Weight:0.67 kg; J:64 mm; S:17 mm;

Minimum Buy Quantity:N/A; C:53.98 mm; Product Group:B04336; EAN:4547359474343; Inventory:4.0; Min operating temperature, Tmin:-40 °C; Brand:NTN; Weight / Kilogram:0; Max operating temperature, Tmax:120 °C; r1a max:3.3 mm;

G:R1/8"; S:17.5 mm; C:25.7 kN; Weight:1.28 kg; A:32.5 mm; d:34.92 mm; J:130 mm; T min.:-40 °C; Designation of bearing:UC207-22G2T04; B:42.9 mm;

d:35 mm; L:274 mm; SW:4 mm; s1:21.45 mm; L1:225 mm; Designation of housing:SP206-207/72N-; Designation of bearing:UC207G2; C:25.7 kN; S:17.5 mm; Designation of open end cover:SCO207-35;

a max:3.28 mm; rNs min:0.5 mm; Da max:101 mm; Ca max:5.74 mm; Dynamic load, C:61.3 kN; Mass:1.07 kg; f:2.41 mm; rs min:2 mm; D4 max:116.6 mm; r0 max:0.6 mm;

B:41.2 mm; C0:20.8 kN; Recommended tightening torque for set screw:11.5 Nm; Designation of closed end cover:SCC209; T min.:-20 °C; s1:20.6 mm; G:R1/8"; T max.:200 °C; L1:260 mm; Designation of open end cover:SCO209-45;

Sealed Speed Rating n3:3200 rpm; D:140.0000 mm; B:61.90 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:163000 N; Accessories:No Shield, no Seal; Basic Dynamic Radial Load Rating C:154000 N; d:65.000 mm; Oil Speed Rating n2:4300 rpm; Grease Speed Rating n1:3200 rpm;

T min.:-20 °C; d:45 mm; D:100 mm; B2:20.6 mm; SW:5 mm; r:2; G:M10x1,25; Weight:1.45 kg; m:8 mm; C:30 mm;

T min.:-20 °C; D:130 mm; S:26 mm; C1:11.3 mm; Recommended tightening torque for set screw:27.1 Nm; C:36 mm; C0:51.8 kN; d:57.15 mm; m:12 mm; B:71 mm;

B2:23.9 mm; B:74.6 mm; S:37.3 mm; T max.:200 °C; D:130 mm; Weight:2.8 kg; r:2; C1:9 mm; G:3/8-24UNF; SW:4.76 mm;

B:55.4 mm; A:64 mm; Recommended tightening torque for set screw:16.8 Nm; A1:22 mm; H1:130 mm; S:27.7 mm; d:55.56 mm; N2:64 mm; SW:4.76 mm; A5:27.7 mm;

T min.:-20 °C; Designation of bearing:US206G2; B:30 mm; Weight:0.67 kg; d:30 mm; L:84 mm; A2:33.4 mm; G:R1/8"; S:8 mm; e:11.4 mm;