FGDB Pump Machinery Equipment Co., Ltd.
FGDB Pump Machinery Equipment Co., Ltd.
PAKER Piston Pump   Rexroth check valve   Rexroth Solenoid directional valve  
English
English
  • Home
  • Stock Categories
    • PAKER Piston Pump
    • Rexroth check valve
    • Rexroth Solenoid directional valve
    • Yuken pressure valve
    • Rexroth Piston Pump
    • DENISON vane pump
    • Yuken Double Vane pump
    • Danfoss Shut-off valves
    • Rexroth THROTTLE VALVE
    • Yuken Piston pump
    • Rexroth PRESSURE RELIEF VALVE
    • Rexroth Vane pump
    • Yuken single Vane pump
    • BOSCH injector
    • CUMMINS injector
    • DEUTZ injector
    • COMMON RAIL injector
    • SINGLE ROW CYLINDRICAL ROLLER BEARING
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Kaydon Slewing Bearing
    • THK Linear Guide
    • THK Miniature Linear Guide
    • THK Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • THK Linear Bearings And Rails
    • THK Linear Motion
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
    • Single-row Deep Groove Ball Bearings
    • Double-row Angular Contact Ball Bearings
  • Technical Articles
  • PAKER Piston Pump
  • Rexroth check valve
  • Rexroth Solenoid directional valve
✖

Home

Stock Categories

Technical Articles

PAKER Piston Pump

Rexroth check valve

Rexroth Solenoid directional valve

Home>Products>THK Miniature Linear Guide>HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series
  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series

THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series

category

THK Miniature Linear Guide

THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L Bearing SPECIFICATIONS

  • THK

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L

  • Pillow Block
  • 0.0
  • N/A
  • 19.522
  • M06288
  • 4
  • Concentric Collar
  • 4 Bolt Pillow Block
Download THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L Spec Sheet
FGDB Pump Machinery Equipment Co., Ltd.

FGDB Pump Machinery Equipment Co., Ltd.China

  • FGDB Pump Machinery Equipment Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series Systems

  • Pillow Block
  • 0.0
  • N/A
  • 19.522
  • M06288
  • 4
  • Concentric Collar
  • 4 Bolt Pillow Block
  • Spherical Roller Bearing
  • Cast Steel
  • Expansion
  • 3/4 Inch
  • Yes
  • 22218
  • Teflon Labyrinth
  • 1 Piece Solid
  • Inch
  • Double Row | Single Collar | With Set Screw
  • 4 Bolt Pillow Block; 3-1/4" Bore; 3-3/4" Base to Center Height; Concentric Collar Mount; Spherical Roller Bearing; 9-1/4" Minimum Bolt Spacing; 11-1/4" Bolt Spacing Maximum; Relubr
  • 31171511
  • 8483.20.40.80
  • Bearing
  • Pillow Block
  • 49
  • 9.25 Inch | 234.95Millimeter
  • 3.75 Inch | 95.25 Millimeter
  • 11.25 Inch | 285.75Millimeter
  • 10.3 Inch | 260.5 Millimeter
  • 0 Inch | 0Millimeter
  • 3.25 Inch | 82.55 Millimeter
  • 4.03 Inch | 102.362 Millimeter
HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series pdf

THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series Characteristics

Size (mm)52x25.4x33
Basic dynamic load rating C14 kN
Thread grub screw G2M5
d133.74 mm
s121.2 mm
Thread - G2M5
Outer Diameter (mm)25,4
Bearing numberYSP 205-100 SB-2F
Limiting speed7000 r/min
D52 mm
s121 mm
Bore Diameter (mm)52
Hexagonal key size for grub screw - H2.5 mm
Width (mm)33
Basic static load rating - C07.8 kN
B133 mm
Calculation factor - f014
Mass bearing0.18 kg
Hexagonal key size for grub screw N2.54 mm
d1 ≈33.74 mm

HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series cross reference by manufacturer

No.BrandBlock TypeSeal OptionCallout SizeDays to ShipAccuracy GradeRolling ElementNumber of blocksRadial Clearance
CSR25+[116-3000/1]/[116-3000/1]L[P,​SP,​UP]THK - - 2582 DaysPrecision Grade / High Precision Grade / Extra High Precision GradeBall1Normal
CSR25C[0,​1]+[116-3000/1]/[116-3000/1]L[P,​SP,​UP]THK - - 2582 DaysPrecision Grade / High Precision Grade / Extra High Precision GradeBall1Light Preload / Medium Precompression
2CSR25+[116-3000/1]/[116-3000/1]L[P,​SP,​UP]THK - - 2582 DaysPrecision Grade / High Precision Grade / Extra High Precision GradeBall2Normal
2CSR25C[0,​1]+[116-3000/1]/[116-3000/1]L[P,​SP,​UP]THK - - 2582 DaysPrecision Grade / High Precision Grade / Extra High Precision GradeBall2Light Preload / Medium Precompression
3CSR25C[0,​1]+[116-3000/1]/[116-3000/1]L[P,​SP,​UP]THK - - 2582 DaysPrecision Grade / High Precision Grade / Extra High Precision GradeBall3Light Preload / Medium Precompression
3CSR25+[116-3000/1]/[116-3000/1]L[P,​SP,​UP]THK - - 2582 DaysPrecision Grade / High Precision Grade / Extra High Precision GradeBall3Normal
GSR30T[1,​2,​3,​4,​5,​6,​7,​8,​9]+[116-3000/1]LTHKStandard - 30QuoteStandard GradeBall1 ～ 9 -
GSR30T[1,​2,​3,​4,​5,​6,​7,​8,​9]+[116-3000/1]L[H,​P]THKStandard - 30QuoteHigh Grade / Precision GradeBall1 ～ 9 -
GSR30T[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]+[116-3000/1]LTHKStandardDD: Double End Seal / KK: Double End Seal and Metal Scraper / SS: End Seal and Side Seal (standard) / UU: End Seal / ZZ: Seal with Metal Scraper30QuoteStandard GradeBall1 ～ 9 -
GSR30T[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​KK,​SS,​UU,​ZZ]+[116-3000/1]L[H,​P]THKStandardDD: Double End Seal / KK: Double End Seal and Metal Scraper / SS: End Seal and Side Seal (standard) / UU: End Seal / ZZ: Seal with Metal Scraper30QuoteHigh Grade / Precision GradeBall1 ～ 9 -
4CSR25+[116-3000/1]/[116-3000/1]L[P,​SP,​UP]THK - - 2582 DaysPrecision Grade / High Precision Grade / Extra High Precision GradeBall4Normal

 

2SRS15N+[62-900/1]LM THK Miniature Linear Guide Caged Ball SRS Seriesd1:3,4 mm; L:25 mm; d:8 mm; H:5 mm; D:16 mm; h:3,3 mm; Basic dynamic load rating (C):0,27 kN; Outer Diameter (mm):16; Bearing number:KBK 08-PP; D1:32 mm; Weight:0,033 Kg; Bore Diameter (mm):8; G:25 mm; A:24 mm; d2:6,5 mm;
2SRS15S[SS,​SSHH,​UU]+[48-900/1]L[H,​P]M THK Miniature Linear Guide Caged Ball SRS SeriesT:169,977 mm; Outer Diameter (mm):559,867; Bearing number:CRD-6113; D:559,867 mm; Bore Diameter (mm):305,003; Size (mm):305.003x559.867x169.; d:305,003 mm; Width (mm):169,977;
2SRS15N+[62-900/1]L[H,​P]M THK Miniature Linear Guide Caged Ball SRS SeriesSize (mm):90x125x35; Basic static load rating (C0):300 kN; M:112,5 mm; d:90 mm; (Grease) Lubrication Speed:1 100 r/min; r min.:1,1 mm; B:35 mm; Outer Diameter (mm):125; Bearing number:SL02-4918; ℓ:1,5 Tolerance h14; D:125 mm; Weight:1,3 Kg; Da:118,5 mm; ra max.:1 mm; Width (mm):35; C:35 mm; Basic dy
2SRS15NC1+[62-900/1]LM THK Miniature Linear Guide Caged Ball SRS SeriesBore Diameter (mm):60; d:60 mm; Bearing number:NJ2212-E-TVP3+HJ2212; B:28 mm; Outer Diameter (mm):110; Basic dynamic load rating (C):144 kN; Width (mm):28; C:28 mm; Size (mm):60x110x28; r4 min.:1,5 mm; D:110 mm; r1 min.:1,5 mm; F:72 mm; r2 min.:1,5 mm; Weight:1,31 Kg; Basic static load rating (C0):1
2SRS15NC1+[62-900/1]L[H,​P]M THK Miniature Linear Guide Caged Ball SRS SeriesCalculation factor - fHC:1; Calculation factor - f2A:1; Da max.:17 mm; Limiting speed for grease lubrication:109000 r/min; B:6 mm; D1:15.7 mm; rb - max.:0.15 mm; Basic static load rating C0:0.6 kN; da min.:10 mm; Calculation factor e:0.68; Calculation factor - Y1:0.92; r3,4 min.:0.15 mm; a:6.5 mm; C
3HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[H,​P,​SP,​UP] THK Separated Linear Guide Side Rails Set Model HRr2 min.:1,5 mm; Da(max):59.5; Weight:0,332 Kg; e:0.55; D:68 mm; db(max):37; da(min):36.5; Bearing number:303/28CR; Cu:7.25; Sb(min):4.5; Basic static load rating (C0):50,2 kN; Db(min):64; da max:37 mm; Size (mm):28x68x19.75; r1(min):1.5; da min.:36,5 mm; Calculation factor (e):0,55; ra max.:1,5 mm;
3HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HRD:140 mm; d:65 mm; T:101 mm; Basic dynamic load rating (C):231 kN; D1:68 mm; D2:100 mm; d3:140 mm; Size (mm):65x140x101; Width (mm):101; Outer Diameter (mm):140; (Grease) Lubrication Speed:1100 r/min; Bore Diameter (mm):65; a:23 mm; r1 min.:1 mm; Bearing number:52413; Basic static load rating (C0):4
3HR2555T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[148-2600/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HROuter Diameter (mm):106,363; Mass bushing:0.45 kg; c1 min:0,2 mm; B:76,2 mm; Shaft diameter range min.:101.544 mm; d:101,6 mm; Coefficient of friction µ min.:0.03; Permissible sliding velocity v max.:2 m/s; Basic dynamic load rating (C):610 kN; Bore Diameter (mm):101,6; α ±8:20 °; C

 

 

HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series Video

 

THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L INTERCHANGE

THK Miniature Linear Guide Part series HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L is a potential replacement for these common bearing part numbers:

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L

Contact Us

FGDB Pump Machinery Equipment Co., Ltd.
Address5625 South Layton Road Anderson Indiana 46011, U.S.A.
Phone(Working Time)
Fax
  • FGDB Pump Machinery Equipment Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L Technical Articles

How do you adjust the pressure on a hydraulic pump?
How to Set a Hydraulic Relief Valve - YouTubeI want to set the pressure around 2000 psi. in this set up you take the jam heading the pump we turn the How to adjust a hydraulic pump output pressure - QuoraPump does not generate pressure, it generates...
What is a 2 stage hydraulic pump?
Hydraulic Gear Pump - 16 GPM, 2-Stage (Brand Amazon.com: Hydraulic Gear Pump - 16 GPM, 2-Stage (Brand New): Home Improvement 2 Stage (Log Splitter) Pumps | Hydraulic Pumps | HydraulicsResults 1 - 15 of 17 — 2 Stage (Log Splitter)...
Which pump is used in hydraulic jack?
Hydraulic jack - DDL WikiFeb 3, 2014 — The Big Red Hydraulic Bottle Jack can be operated with everything in the Inner handle piece, used to pump fluid, Painted steel, Bent, Welded Jack (device) - WikipediaJump to Hydraulic jack — A...

THK Miniature Linear Guide CATEGORIES

  • PAKER Piston Pump
  • Rexroth check valve
  • Rexroth Solenoid directional valve
  • Yuken pressure valve
  • Rexroth Piston Pump
  • DENISON vane pump
  • Yuken Double Vane pump
  • Danfoss Shut-off valves
  • Rexroth THROTTLE VALVE
  • Yuken Piston pump
  • Rexroth PRESSURE RELIEF VALVE
  • Rexroth Vane pump
  • Yuken single Vane pump
  • BOSCH injector
  • CUMMINS injector
  • DEUTZ injector
  • COMMON RAIL injector
  • SINGLE ROW CYLINDRICAL ROLLER BEARING
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Bearing Slewing Ring
  • Kaydon Slewing Bearing
  • THK Linear Guide
  • THK Miniature Linear Guide
  • THK Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • THK Linear Bearings And Rails
  • THK Linear Motion
  • Bearings For Metric And Inch Shaft Sizes
  • Cylindrical Roller Bearings
  • Single-row Deep Groove Ball Bearings
  • Double-row Angular Contact Ball Bearings
More

Customers Who Viewed THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[116-3000/1]L Bearing Also Viewed

  • 2SRS15S[SS,​SSHH,​UU]+[48-900/1]L[H,​P]M THK Miniature Linear Guide Caged Ball SRS Series
  • 2SRS15N+[62-900/1]LM THK Miniature Linear Guide Caged Ball SRS Series
  • 2SRS15N+[62-900/1]L[H,​P]M THK Miniature Linear Guide Caged Ball SRS Series
  • 2SRS15NC1+[62-900/1]LM THK Miniature Linear Guide Caged Ball SRS Series
  • 2SRS15NC1+[62-900/1]L[H,​P]M THK Miniature Linear Guide Caged Ball SRS Series
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

FGDB Pump Machinery Equipment Co., Ltd.. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • PAKER Piston Pump
    • Rexroth check valve
    • Rexroth Solenoid directional valve
    • Yuken pressure valve
    • Rexroth Piston Pump
    • DENISON vane pump
    • Yuken Double Vane pump
    • Danfoss Shut-off valves
    • Rexroth THROTTLE VALVE
    • Yuken Piston pump
    • Rexroth PRESSURE RELIEF VALVE
    • Rexroth Vane pump
    • Yuken single Vane pump
    • BOSCH injector
    • CUMMINS injector
    • DEUTZ injector
    • COMMON RAIL injector
    • SINGLE ROW CYLINDRICAL ROLLER BEARING
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Kaydon Slewing Bearing
    • THK Linear Guide
    • THK Miniature Linear Guide
    • THK Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • THK Linear Bearings And Rails
    • THK Linear Motion
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
    • Single-row Deep Groove Ball Bearings
    • Double-row Angular Contact Ball Bearings
  • Technical Articles
  • PAKER Piston Pump
  • Rexroth check valve
  • Rexroth Solenoid directional valve
✖

Home

Stock Categories

Technical Articles

PAKER Piston Pump

Rexroth check valve

Rexroth Solenoid directional valve

Contact Us